1668E6-24V Heavy Duty Circuit Tester

Descriptions:

Check on 6 , 12V and 24V systems. To indicate whether there is an electrical potential at any low voltage point in the system. By using the pointed contact tip to pierce insulation on cables, it will also indicate if current is present. This can be helpful when tracing faults or add cable to a circuit.

Features:

  • With CE & UKCA Approvals.
  • Probe length: Approximately 88mm / 3.46"
  • 5-feet flexible rubber wire with spring relief.
  • Tough plastic handle lights up when circuit is in good condition.

Specifications:

VOLTAGE MEASUREMENT
VOLTAGE RANGE 6-24V
LENGTH
PROBE 88mm / 3.46"         
COIL CORD 5-feet
INSTRUCTIONS
  1. This quality circuit tester has an impact resistant transparent handle, incorporating with a test light, 150cm (5-feet) of heavy duty insulated cable and a crocodile (earth) clip.
  2. The crocodile (earth) clip is clamped to a suitable earth point and the contact tip is placed onto the part to be tested.  If current is present, the test light will be glowed.