7610A30A Auto Current & Voltage Tester

Descriptions:

Fast, accurate and safety current measurement from the fuse box.
Feature with large LCD display and mini/ATO fuse probe.
Ideal for diagnostic of vehicle's electrical circuits.
With CE Approval.

Specifications:

CURRENT MEASUREMENT
MAXIMUM LOAD 30A / 48V DC for 10 seconds
ACCURACY ±1%, or 0.1 reading with 1 decimal place
VOLTAGE ENVIRONMENT
RANGE 1-48V DC
ACCURACY ±1%, or 0.1 reading with 1 decimal place
WRONG POLARITY:
when user reversely connects the polarity, the display will show ERR.
CONTINUITY TEST
If the measured resistance is less than 1KΩ, LCD will display ERR
WORKING TEMPERATURE               0 to 50°C (32°F to 122°F)
STORAGE TEMPERATURE ≦-20 to 60°C (-4°F to 140°F)
MOISTURE <70% RH (working), <80% RH (storage)
MAXIMUM HEIGHT 7,000ft (2,000m)
BATTERY 9V battery x 1
INSTRUCTIONS
Current Measurement: 
  1. Turn off the vehicle power and connect the tester.
  2. Press the "POWER" button to switch on the power.
  3. Press "MODE" button to change the function to current measurement mode. The letter "A" shall display on the LCD.
  4. Remove the fuse from the fuse box in the vehicle. Put the fuse into the fuse probe.
  5. Plug the fuse probe into the fuse socket. User can start the measurement. User can turn on the vehicle if it is necessary.
  6. Current can only be measured through the fuse probe.
Voltage Measurement:
  1. Turn off the vehicle power and connect the tester.
  2. Press the "POWER" button to switch on the power.
  3. Press "MODE" button to change the function to voltage measurement mode. The letter "V" shall display on the LCD. User can start the measurement.
  4. During the measurement, if the voltage is less than 1 volt, no voltage will be displayed.
  5. During the measurement, if the measured polarity is reversed, "ERR" will be displayed, and buzzer will buzz. Please reverse the test probe and do the measurement again.
Continuity Measurement:
  1. Same step as voltage measurement 1 – 3.
  2. If the resistance is less than 1k ohm, "ERR" will be displayed, and buzzer will buzz. This indicates that it's a continue circuit.