6513DBrake Fluid Boiling Point Tester with Bluetooth Printer

Descriptions:

This tester can measure the boil point of the brake fluid. It can obtain the wet boiling temperature of the brake fluid for technician as a reference for maintenance. It can be the reference when technician is going to change the brake fluid.The testing data print by Bluetooth printer.

Features:

  • Power: 12V automotive battery
  • Working Environment: 0-50°C
  • Use on oil type of DOT3, DOT4, DOT5.1
  • Data print by Bluetooth printer

Specifications:

ABOUT BOILING POINT
BOILING POINT TYPE DOT 3 DOT 4 DOT 5.1
DRY BOILING POINT ≥205°C ≥230°C ≥260°C
WET BOILING POINT ≥140°C ≥155°C ≥180°C
INSTRUCTIONS
  1. Suggest battery voltage between 12-13V.
  2. Both "Brake fluid cycle paths" must be immersed into the brake fluid.
  3. Please keep the Brake Fluid Testing Probe perpendicular with the brake fluid during the test.
  4. If "Wait Cool" appears on the LCD, please wait for the heating wire to cool down before next test.
  5. User can use the "Brake fluid sucker" to draw some brake fluid into the measuring cup for testing.
  6. Make sure power clips are connected tightly with correct polarity before any measurement.
  7. After the testing, please wait at least 3 seconds for heating wire to cool down before take testing probe out of the brake fluid.
  8. Avoid the shaking and smashing of the testing probe, especially after the test.
  9. User can print the testing data by Bluetooth printer.