- Products
- Electrical
- Circuit Breaker Finder
6504Circuit Breaker Finder
Descriptions:
Circuit Breaker Finder is a multi-function circuit tracer/ identifier. Circuit Breaker Finder identifies circuit breakers without interrupting service.
This device is formed by 1x Transmitter and 1x Receiver.
There are 3 functions:
(1) Socket Tester (Wire Mapping)
(2) Circuit Tracing / Identifying
(3) Non-Contact Voltage Detecting
Features:
- With ETL Approval.
- Clear Visual And Audible Indications.
- Test for GFCI receptacle for proper operation.
- Non-Contact Voltage Detecting.
- TWO derivative ways to locate the No Fuse Breaker:1.Searching Mode 2.Comparison Mode
- At "Comparison Mode", even if the signal strength is very close, Circuit Breaker Finder could identify the circuit breaker accurately.
- Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet.
- Patented.
Specifications:
|
SPECIFICATION |
|
|---|---|
Receiver |
|
Non-Contact Voltage Detection |
24~300VAC |
Auto Shut Down |
After 10 minutes w/o any operation |
Battery |
9V Alkaline X 1 |
Function |
1. Non-Contact Voltage Detecting (NCV) -4 sensitivity levels 2. No Fuse Breaker (NFB) Finder (Use with the Transmitter) (1)NFB SEARCHING Mode-5 sensitivity levels (2)NFB COMPARISON Mode |
Transmitter |
|
Voltage |
120VAC Single Phase Two Wires (Live, Neutral) with Ground |
Frequency |
47~63Hz |
GFCI Leaking Current |
7mA@120VAC |
Power Plug Type |
TYPE B for US |
Function |
1. Wire Mapping Of Power Receptacle 2. Test for GFCI receptacle for proper operation 3. By plugging into the socket to send a signal to the receiver to locate the circuit breaker (Use with the receiver) |
|
GENERAL SPECIFICATION |
|
Operating Environment |
0~50℃(32~122°F); 30~80% RH max; 50% RH above 30℃ |
Storage Environment |
-30~70℃(-22~158°F); 80% RH max |
Altitude |
< 2000m, for indoor application only |
Pollution Degree |
2 |
Safty Standard |
UL 61010-1 UL 61010-2-030 CAT II 300V (Transmitter) CAT III 300V (Receiver) |
