LCD Pin Type Moisture Meter

2021LCD Pin Type Moisture Meter

Descriptions:

This is a equipment to measure material moisture, environment temperature and humidity. Generally the user will use this device to measure the water containment of wood, building material, etc. Environment temperature and humidity can be the reference when user measures the water containment of the material.

Features:

LCD Display.
Auto power off.
10 category measurement for different material.
Environment temperature, environment humidity, material moisture measurement.

ADD TO INQUIRY

Specifications:

UNIT
ENVIRONMENT TEMPERATURE	°C / °F
ENVIRONMENT HUMIDITY	RH %
MATERIAL MOISTURE	%
MEASUREMENT RANGE
CATEGORY 0	Environment Temperature 0-50°C
CATEGORY 1	Environment Humidity 25-90%
CATEGORY 9	9.0-22.2%
CATEGORY 2	11.0-58.0%
CATEGORY 3	10.0-53.0%
CATEGORY 4	2.0-24.0%
CATEGORY 5	0.0-12.0%
CATEGORY 6	0.9-9.0%
CATEGORY 7	0.6-11.0%
CATEGORY 8	0.2-17.0%
RESOLUTION
ENVIRONMENT TEMPERATURE	0.1 °C/°F
ENVIRONMENT HUMIDITY	1%
MATERIAL MOISTURE	0.1%
ACCURACY
ENVIRONMENT TEMPERATURE	±1°C@0-50°C
ENVIRONMENT HUMIDITY	±5%@10-80°%
MATERIAL MOISTURE	±1%@20-30°C ±2%@other temperature
MEASUREMENT SPEED
ENVIRONMENT TEMPERATURE REFRESH TIME	1 min
ENVIRONMENT HUMIDITY REFRESH TIME	1 min
MATERIAL MOISTURE REFRESH TIME	5s
STORAGE AND OPERATING CONDITION
WORKING ENVIRONMENT	0-50°C @ <80% RH (without freeze)
STORAGE ENVIRONMENT	-10-60°C @ <70% RH (without freeze)
POWER
BATTERY	4 x 1.5V AAA
INSTRUCTIONS
a) Power ON /OFF Short press ON/OFF button to switch on the power. Long press ON/OFF button again will switch off the power. Device will auto power off after 10 minutes.
b) Material Category Selection Short press ON/OFF button to select the material category after the device been powered on, The category is listed following: 0: Environment Temperature 1: Environment Humidity 2: Wood with unknown density 3: Wood with density about 0.65-0.8 g/m³ 4: Wood with density about 0.45-0.55 g/m³ 5: Cement, concrete with density about 2.5-3.1 g/m 6: Anhydrite with density about 0.9 g/m 7: Cement mix with sand with density about 1.9 g/m 8: Lime mortar with density about 2.1 g/m 9: Brick with density about 1.8 g/m³ After category selection, please press UNIT button to start the measurement.
c) Unit Change During the category 0 (Environment Temperature) measurement, press UNIT button to change between °C and °F. During the category 2-9 measurement, press UNIT button to start the measurement.
d) Caution For better accuracy, please repeat the measurement on multiple location with a material. During category 2-9 measurement, please pull the probe into the material as deep as possible, then press the UNIT button to start the measurement; it will take about 5 seconds to get a stable reading. keep the interfere temperature / moisture source (eg. Hands) away from the testing probe.